Material Description:

The three-layer, elastic, waterproofing membrane is designed for waterproofing floors with ceramic tiles capable of cracking due to temperature and mechanical deformations. 

The waterproofing membrane consists of one layer of polymer membrane and two layers of geotextile. 

In general, waterproofing membranes are an essential element of building construction to protect buildings and structures from moisture and other liquids. 

They provide reliable protection against various types of moisture, reduce the risk of damage to building structures, improve their operational properties, and extend their service life.

Advantages waterproofing:

• The three-layer structure of the membrane ensures high resistance to various temperature and mechanical deformations, allowing it to be used in different conditions and climatic zones.
• The polymer layer is the main element of the waterproofing membrane, providing reliable protection against water and other liquids.
• Two layers of geotextile on both sides of the polymer membrane provide additional strength and resistance to mechanical damage during installation and operation, as well as ensure increased adhesion to the substrate.
• The elastic properties of the membrane allow it to adapt to different shapes and sizes of structures, providing reliable protection against moisture and liquids in any conditions.
• The waterproofing membrane can be applied to the surface using mineral adhesive.

Application Areas:

• Balconies and terraces;
• Swimming pools;
• Flat roofs in operation;
• Heated floors in bathrooms;
• Sanitary and technical rooms;
• Industrial buildings;
• Cold rooms and warehouses.

Waterproofing Installation Recommendations:

Before installing the waterproofing membrane, it is necessary to prepare the base to ensure the best adhesion quality and prevent membrane damage in the future. For this, the base surface must be strong to ensure the membrane's resistance to any mechanical influences. It is also important for the surface to be clean to avoid uneven distribution of adhesive and any contaminants that could cause weak adhesion. Finally, the surface should be rough to ensure better adhesion between the adhesive and the base.

Cleaning the base before installing the waterproofing membrane can be done using manual equipment. Mechanized tools such as water jet units or vacuum cleaners can also be used. For manual cleaning, brushes with soft bristles or spatulas can be used to remove dirt and dust. If there are oil stains on the base surface, special solvents can be used to remove the contamination.

Water jet units help remove dirt and contaminants using a high-pressure water flow. Vacuum cleaners help remove dust and other small particles that may remain on the surface. Regardless of the cleaning method used, after cleaning, the surface should be rinsed and allowed to dry before installing the waterproofing membrane.

To ensure maximum efficiency of the waterproofing membrane, it is recommended to apply a high-quality acrylic primer to the surface before installation. The primer helps improve adhesion between the adhesive and the base. It is recommended to apply the primer evenly and ensure complete coverage of the base surface. The primer should be allowed to dry completely (usually from 4 to 24 hours depending on weather conditions and the type of primer) before starting the installation of the waterproofing membrane.

The waterproofing membrane should be installed according to the manufacturer's requirements. Typically, the membrane is glued to the base surface using a special mineral-based adhesive by overlapping. This means that the adhesive is applied to the surface of the bottom layer of geotextile, after which the top layer of the membrane is applied to this surface in such a way that it overlaps the bottom layer by 100 mm. Thus, a continuous membrane with reliable sealed joints between the layers is formed.

During installation, it is necessary to follow the technology rules to avoid wrinkles, air bubbles, or disruption of the adhesive joint density. Various tools such as rollers or spatulas can be used for this purpose. After installing the membrane, it should be checked for damage and the tightness of the adhesive joint. If defects are found, they should be corrected before continuing the work.

Finally, the membrane should be protected from possible mechanical damage and direct sunlight, especially during work on the surface. Protective materials such as film or foam can be used for this purpose. Sharp objects or any materials that could damage the waterproofing should also be prevented from penetrating the membrane surface.

By following all these recommendations and adhering to the technology rules, maximum efficiency of the waterproofing membrane can be ensured, and the building can be protected from moisture penetration.

Storage:

The warranty storage period is 18 months at temperatures from -30 to +50°C in a dry place and in the original undamaged packaging without direct exposure to ultraviolet light.

Safety Measures:

During the installation of the waterproofing membrane, the following safety measures should be observed:

• Ensure safety at the workplace. Make sure the workplace is clean, empty, and free from hazardous materials. Install barriers and safety signs where necessary.
• Use appropriate eye and respiratory protection. During the installation of the waterproofing membrane, dust, smoke, and other substances may be emitted, which could pose a health risk. Use protective goggles and respirators.
• Do not work in hazardous conditions. Do not work in hazardous conditions, such as at heights without adequate protection or in confined spaces without sufficient ventilation.
• Use safe tools and equipment. Make sure the tools and equipment you use are safe for work. Check them before use.
• When working with the waterproofing membrane, follow safety rules for working with liquids and chemicals.Material description:

"Megatron Suture" is a material used for sealing seams, cracks, and joints in building constructions. 

The suture composition includes modified Portland cement, carefully selected quartz filler, and chemical additives. 

"Megatron Suture" exhibits high bonding strength with the substrate, high waterproofing, chemical, and corrosion resistance. 

It is used for waterproofing static structures made of monolithic concrete and prefabricated reinforced concrete.

Advantages of "Megatron Suture": 

• High bonding strength: "Megatron Suture" possesses high bonding strength with the substrate, ensuring reliable adhesion to the surface, providing high moisture protection efficiency.
• Wide range of applications: "Megatron Suture" can be applied to various types of concrete structures (cement screeds and plasters, foundation walls, foundation slabs).
• Waterproofing: "Megatron Suture" has high waterproofing properties, making it effective in preventing water and moisture penetration into the structure.
• Ease of use: It is applied exclusively to a wet surface (does not require surface drying) from any accessible side of the structure. No additional protection is required.
• Chemical and corrosion resistance: "Megatron Suture" possesses properties that allow it to withstand the influence of chemicals and avoid corrosion from seawater and groundwater.
• "Megatron Suture" does not contain harmful substances and does not harm the environment, approved for use in drinking water tanks.

Applications: 

• Waterproofing prefabricated concrete structures (foundation blocks, floor panels, balcony slabs, etc.).
• Waterproofing monolithic concrete structures (foundation slabs, cement-based screeds, columns, staircases, etc.).
• Waterproofing industrial structures (foundation slabs, columns, wall panels, etc.).
• Waterproofing agricultural structures (silos, bunkers, gas holders, underground and aboveground galleries, etc.).
• Waterproofing water management structures (pipelines, reservoirs, wells, boreholes, etc.).
• Waterproofing mining facilities.
• Waterproofing sewage treatment facilities (septic tanks, settling tanks, etc.).

Application recommendations: 

"Megatron Suture" should be applied according to the manufacturer's technological regulations.

 Before applying "Megatron Suture," surface preparation is necessary to ensure the best bonding and penetration quality. 

Grooving is performed along the entire length of the crack using a hammer, mill, or other mechanical means. The cross-section should be at least 25x25 mm to ensure the necessary strength and water resistance. For sufficiently large grooves, the material is applied in layers of no more than 30 mm. 

The material is manually applied to the pre-moistened void of the seam, crack, or groove or using a spatula. Additionally, for closing large cracks to save material, the addition of fine washed gravel (5-10 mm) in an amount of 25-30% by volume is allowed. It is recommended to additionally treat the filled groove with "Megatron Penetrating." It is important to note that with an increase in the cross-section of the groove or crack, the material consumption increases.

The dry mixture should be mixed with water in a ratio of 1 kg of mixture to 200 g of water (or in a ratio of 5:1, where five parts of the dry mixture to one part of water by volume). 

The amount of water may depend on the temperature and humidity of the surrounding environment. Water is poured into the dry mixture in small portions and manually or mechanically mixed for 1-2 minutes. 

The mixture will acquire a consistency of clay. Prepare only as much solution as can be used within 15-30 minutes. 

During use, the material should be regularly stirred. Additional water addition is not allowed.

The application work should be carried out at a temperature not lower than +5°C.

Attention! Pressurized leaks should be sealed with Megatron Sealant.

Technical Specifications:

Material Consumption:

The consumption of "Megatron Suture" material is 1.7 kg/linear meter for a groove of 25 x 25 mm.

Storage:

The guaranteed shelf life is 12 months at temperatures from -20 to +60°C in undamaged factory packaging.

Safety Measures:

During the use of "Megatron Suture," it is necessary to adhere to the following safety measures:

• Ensure workplace safety. Make sure the workplace is clean, empty, and free from hazardous materials. Install barriers and safety signs where necessary.
• Use appropriate eye and respiratory protection. Dust and other substances may be released during waterproofing, posing a health risk. Use protective goggles and respirators.
• Use safe tools and equipment. Ensure that the tools and equipment you use are safe for work. Check them before use.
• When working with waterproofing, follow safety rules for working with liquids and chemicals.
• Follow all safety requirements established by relevant organizations and manufacturers.
• Ensure that the materials you use are environmentally safe and do not have a negative impact on the environment.
• Ensure that the installation of the waterproofing membrane complies with all standards and regulations. Follow all safety requirements established by relevant organizations and manufacturers.
• Prefer the use of environmentally safe materials. Make sure the materials you use are environmentally safe and do not have a negative impact on the environment.